LIU Yu, YANG Xinxin, HAO Rui. Effect of diffusion welding technology on the properties of 6063 aluminum alloy welded joints[J]. WELDING & JOINING, 2019, (7): 31-33,39. DOI: 10.12073/j.hj.20180802002
Citation: LIU Yu, YANG Xinxin, HAO Rui. Effect of diffusion welding technology on the properties of 6063 aluminum alloy welded joints[J]. WELDING & JOINING, 2019, (7): 31-33,39. DOI: 10.12073/j.hj.20180802002

Effect of diffusion welding technology on the properties of 6063 aluminum alloy welded joints

More Information
  • Received Date: August 01, 2018
  • 6063 aluminum alloy was welded through solid-state diffusion bonding and transient liquid phase bonding,respectively. The microstructure near the diffusion interface was observed by metallographic microscope. The tensile strength of the joints was tested on universal testing machine. Test results show that solid-state diffusion bonding can obtain better joint performance than that of transient liquid phase bonding when connecting the same aluminum alloy. In the case of welding temperature 540 ℃,welding pressure 8 MPa and holding time 80 min,the composition of joint obtained by solid-state diffusion bonding is uniform without cavity defects. The tensile strength is 122 MPa,which is 94% of the base metal under the same heat treatment condition.
  • [1]
    赵丽敏,刘黎明,徐荣亚,等.镁合金与铝合金的夹层扩撒焊连接[J].焊接学报,2007,28(10):9-12.
    [2]
    杨鑫鑫,侯凯.高效散热窄通道铝合金冷板扩散焊接及成型技术研究[J].制导与引信,2016,37(1):49-52.
    [3]
    颜景润,任玉灿,吴伟静,等.扩散焊工艺对7075铝合金焊接接头性能的影响[J].热加工工艺,2014,43(9):219-223.
    [4]
    Meengam C,Dunyakul Y,Maunkhaw D,et al.Transient liquid phase bonding of semi-solid metal 7075 aluminum alloy using ZA27 zinc alloy interlayer[J].Metals,2018,8(8):1-13.
    [5]
    陈思杰,李报,邢增为,等.连接温度对Q235/7075铝合金TLP扩散连接接头组织和性能的影响[J].热加工工艺,2016,45(11):68-70,75.
    [6]
    刘鹏,李亚江,王娟.Mg/Al异种材料扩散焊界面组织结构及力学性能[J].焊接学报,2007,28(6):45-49. [][]
    [7]
    Sun Q Z,Wang H B,Yang C.Microstructure and properties of the Al-27Si/Cu/Al-50Si joint brazed by the partial transient liquid phase bonding[J].Metallurgical and Materials Transactions B,2018,49B:933-938.
    [8]
    Li Z W,Xu Z W,Zhu D W,et al.Control of Mg2Sn formation through ultrasonic-assisted transient liquid phase bonding of Mg to Al[J].Journal of Amterials Processing Technology,2018,255:524-529.
    [9]
    刘鹏,李亚江,王娟,等.Mg/Al异种材料真空扩散焊界面区域的显微组织[J].焊接学报,2004,25(5):5-8.
    [10]
    Wei Y N,Sun F,Tan S Y,et al.Study on microstructure and performance of transient liquid phase bonding of Cu/Al with Al-based interlayers[J].Vacuum,2018,154:18-24.
  • Related Articles

    [1]Chen Xiao, Yan Chengqi, Dai Junhui. IRSM-based tensile strength reliability optimization design of 7075 aluminum alloy welded joints[J]. WELDING & JOINING, 2024, (10): 32-41. DOI: 10.12073/j.hj.20230811001
    [2]Qi Guangbin, Hao Xiaohu, Dong Honggang, Xu Chenling, Jiao Xinggui, He Jianwei. Microstructure and mechanical properties of 6082-T651 aluminum alloy cruciform welded joints[J]. WELDING & JOINING, 2021, (6): 1-8. DOI: 10.12073/j.hj.20210123003
    [3]Yu Kang, Zhou Jun, Zhou Jie. Effect of welding temperature on microstructure and properties of titanium alloy diffusion welded joints[J]. WELDING & JOINING, 2021, (4): 25-27,44. DOI: 10.12073/j.hj.20201214005
    [4]GUO Bozheng, YAN Dejun, DONG Honggang. Microstructure and mechanical properties of 5083 aluminum alloy/E36 steel fusion-brazed joint[J]. WELDING & JOINING, 2020, (3): 29-34. DOI: 10.12073/j.hj.20200202001
    [5]LEI Yucheng, ZHAO Jun, ZHU Qiang, CHEN Wenbin. Effects of post-weld heat treatment on microstructure and mechanical properties of aluminum alloy/galvanized steel joints[J]. WELDING & JOINING, 2018, (3): 15-18.
    [6]LI Shuzhen, Lü Dengfeng, LONG Weimin, LIU Yixian, CHEN Yong, LIU Shengxin. Microstructures and properties of brass joint with CuPSn brazing metal[J]. WELDING & JOINING, 2018, (1): 38-41.
    [7]Song Bingbing, Yang Li, Zhou Shiyuan, Wang Guoqiang, Shi Xiaolong. Effect of aging temperature on reliability of soldered joint with Sn-0.7Cu-xFe filler metal[J]. WELDING & JOINING, 2017, (11): 17-20.
    [8]Zhu Hai1, Sun Long1, Peng Chunming2, Sun Jinrui1, Tang Huakun1, Yin Zhiyuan2. Relationship between forming quality and performances of 6061 aluminum alloy joint and friction stir welding parameters[J]. WELDING & JOINING, 2017, (7): 45-48.
    [9]Zhang Dongdong, Liu Shuying, Chen Ze, Zhang Yiwen. Effect of element Sn and Cu on microstructure and mechanical properties of Zn-10Al solder[J]. WELDING & JOINING, 2017, (4): 21-24.
    [10]Zhao Yunqiang, Deng Jun, Wang Chungui, Dong Chunlin. Microstructure and mechanical properties of bobbin tool friction stir welded joints of 6063 aluminum alloy[J]. WELDING & JOINING, 2017, (3): 35-39.
  • Cited by

    Periodical cited type(8)

    1. 陈曦,孟令刚,徐大召,周秉文,亚斌,张兴国. 塑性变形对2219铝合金扩散连接的影响. 金属热处理. 2024(02): 104-112 .
    2. 董丽斌,代雪婷,南健. 飞机辅助进气门冷喷涂再制造修复技术研究. 长沙航空职业技术学院学报. 2023(01): 9-12 .
    3. 杜俊莉,曹海军,郑善伟,马力,杨保琳. 焊接表面状态对铝合金真空扩散焊焊缝质量的影响. 机械制造文摘(焊接分册). 2023(02): 31-34+48 .
    4. 俞浩,景栋,孟令刚,张长日,刘运峰,张兴国. 电场对2219铝合金扩散连接界面愈合及力学性能的影响. 特种铸造及有色合金. 2023(11): 1533-1539 .
    5. 田野,许春停,付任,李盛鹏,刘颖. 毫米波构件真空扩散焊工艺及变形控制. 电子机械工程. 2022(03): 51-54 .
    6. 张长日,孟令刚,徐大召,周秉文,江林岚清,张兴国. 温度对2A12铝合金扩散连接中的界面愈合与性能影响. 特种铸造及有色合金. 2022(07): 875-880 .
    7. 单晨,龙芋宏,赵要武,赵钰涣,李兆艳. 钢铝异种金属激光焊接接头力学性能的研究进展. 热加工工艺. 2022(19): 1-6 .
    8. 郭振付,刘校桦. 焊后处理工艺对铝合金焊接接头拉伸性能影响. 世界有色金属. 2019(17): 173-174 .

    Other cited types(7)

Catalog

    Article views (27) PDF downloads (13) Cited by(15)

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return