Microstructure and properties of resistance spot welded joint of 55% SiC<sub>p</sub>/A356Al composites

FAN Mingbao; WANG Yongliang; YIN Jinlong; WANG Shijun; LI Xingrui

doi:10.12073/j.hj.20200304001

WELDING & JOINING > 2020 > (6): 33-37. > DOI: 10.12073/j.hj.20200304001

FAN Mingbao, WANG Yongliang, YIN Jinlong, WANG Shijun, LI Xingrui. Microstructure and properties of resistance spot welded joint of 55% SiC_p/A356Al composites[J]. WELDING & JOINING, 2020, (6): 33-37. DOI: 10.12073/j.hj.20200304001

Citation:

PDF (1589 KB)

Microstructure and properties of resistance spot welded joint of 55% SiC_p/A356Al composites

1. CRRC Changchun Railway Vehicles Co., Ltd., Changchun 130062, China;
2. Zhengzhou University, Zhengzhou 450001, China

More Information

Received Date: March 03, 2020

Graphical Abstract

Abstract

Abstract

55% SiC_p/A356 Al composites were welded by resistance spot welding process,and welding schemes for samples were designed to be directly welded without interlayer and welded with aluminum foil interlayer. The microstructure,shear strength,microhardness,nugget diameter and interface reaction of resistance spot welded joints under different schemes were analyzed and compared. Interface connection model of high volume fraction 55% SiC_p/A356 Al composites was established,and the relationship between joint strength and interface model was discussed. The results showed that under the optimized welding parameters,the joint was well formed without obvious defects,and the SiC particles evenly distributed in the nugget zone without interfacial reactions. After being welded with aluminum foil sandwiched between the samples,strong and sub-weak connection reactions only occurred at the interface. The joint strength increased,and the average tensile shear force was 2 165. 6 N. The average nugget diameter was 9. 5 mm,microhardness of the joint was consistent with its microstructure distribution,and there was no significant difference from microhardness of the base metal.
- 55% SiC_p/A356Al composites,
- resistance spot welding,
- microstructure,
- interfacial reaction,
- microhardness

FullText(HTML)

References (14)

References

[1]	牛济泰, 程东锋, 高增, 等. SiC颗粒增强铝基复合材料的连接现状[J]. 焊接学报, 2019, 40(3): 161-166.
[2]	方玲, 张小联, 王科军. 高体积分数SiC_p/Al复合材料的研究现状[J]. 江西有色金属, 2007, 21(4): 34-37.
[3]	Wang P, Li Q, Niu J T. Investigation on soldering high volume fraction SiC particle reinforced aluminum metal matrix composites [J]. Advanced Materials Research, 2013, 853: 90-95.
[4]	樊建中, 姚忠凯, 李义春, 等. 颗粒增强铝基复合材料研究进展[J]. 材料导报, 1997, 11(3): 48-51.
[5]	崔岩. 碳化硅颗粒增强铝基复合材料的航空航天应用[J]. 材料工程, 2002(6): 3-6.
[6]	陈国庆, 甄公博, 冯吉才. SiC_p/Al复合材料焊接技术的研究现状与展望[J]. 宇航材料工艺, 2013, 43(3): 35-46.
[7]	崔海超, 芦凤桂, 唐新华, 等. 原位生成铝基复合材料的激光焊接[J]. 焊接学报, 2010, 31(8): 68-72.
[8]	赵明久, 吕毓雄, 陈礼清, 等. 碳化硅颗粒增强铝基复合材料(SiC_p/2024Al)的扩散焊研究[J]. 材料研究学报2000, 14(2): 136-140.
[9]	李俐群, 左智成, 陶汪, 等. 高比分SiC_p/2024铝基复合材料激光原位焊接头断裂行为[J]. 焊接学报, 2012, 33(4): 65-68.
[10]	郭绍庆, 袁鸿, 谷卫华, 等. 采用非增强中间层电子束焊接SiC_p/Al [J]. 复合材料学报, 2006, 23(1): 92-98.
[11]	Peng K,Cui H C,Lu F G, et al. Mechanical properties and wear resistance of aluminum composite welded by electron beam [J]. Transactions of Nonferrous Metals Society of China, 2011, 21(9): 1925-1931.
[12]	Liu L M,Zhu M L,Pan L X, et al. Studying of micro-bonding in diffusion welding joint for composite [J]. Materials Science and Engineering A, 2001, 315(1-2): 103-107.
[13]	Ureña A, Escalera M D, Gil L. Influence of interface reactions on fracture mechanisms in TIG arc-welded aluminium matrix composites [J]. Composites Science and Technology, 2000, 60(4): 613-622.
[14]	陈国庆, 张秉刚, 甄公博, 等. SiC_p/Al复合材料电子束焊接接头组织及性能[J]. 焊接学报, 2013, 34(7): 77-80.

Cited By

Cited by

Periodical cited type(0)

Other cited types(1)

Get Citation

PDF

XML

Article views (11) PDF downloads (9) Cited by(1)

Turn off MathJax

Article Contents

Abstract

References

Microstructure and properties of resistance spot welded joint of 55% SiCp/A356Al composites

Abstract

References

Cited by

Periodical cited type(0)

Other cited types(1)

Catalog

Export File

Citation

Format

Content

Microstructure and properties of resistance spot welded joint of 55% SiC_p/A356Al composites