LU Chunyang, MA Zhipeng, JIANG Haicheng, ZHANG Mingxuan, YU Haiyang. Research status of joining technology of ceramic to metal[J]. WELDING & JOINING, 2018, (9): 15-20.
Citation: LU Chunyang, MA Zhipeng, JIANG Haicheng, ZHANG Mingxuan, YU Haiyang. Research status of joining technology of ceramic to metal[J]. WELDING & JOINING, 2018, (9): 15-20.

Research status of joining technology of ceramic to metal

More Information
  • Received Date: May 06, 2018
  • Joining components of ceramics and metal can make up for the deficiency in their individual performance,which change the situation of difficult forming and poor resistance to shock load of mono-complex ceramic parts in use,and the joining methods also reduce the manufacturing cost of composite materials. The corresponding joining methods include the most widely used brazing,self-propagating high-temperature synthesis( SHS) joining,and solid-phase diffusion joining,and so on. Five kinds of common ceramics being taken as examples in this paper,the difficulties in joining ceramics to metal were analyzed,the current joining status of dissimilar materials between ceramics and metal were discussed. Besides,and the joining mechanism,technical characteristic and research status were introduced. At last,the prospect on the future development trend was proposed.
  • [1]
    翟阳. 陶瓷与陶瓷/陶瓷与金属连接新材料新工艺的研究[D]. 北京: 清华大学硕士学位论文, 1995.
    [2]
    杨伟群, 李树杰. 陶瓷/金属的连接工艺[J]. 航空制造工程, 1998 (1): 17-19.
    [3]
    黄万群, 李亚江, 王娟, 等. 陶瓷/金属钎焊与扩散连接的研究现状[J]. 焊接, 2007(4): 11-13.
    [4]
    刘会杰, 李广. 陶瓷与金属扩散连接的研究现状[J]. 焊接, 2000(9): 7-12.
    [5]
    王洪潇. 氧化铝陶瓷与金属活性封接技术研究[D]. 辽宁大连:大连交通大学硕士学位论文, 2006.
    [6]
    陈登权. 陶瓷/金属钎焊用钎料及其钎焊工艺进展[J]. 贵金属, 2001, 22(1): 53-56.
    [7]
    付伟. Al2O3陶瓷反应金属化及其与紫铜钎焊工艺及机理研究[D]. 哈尔滨:哈尔滨工业大学硕士学位论文, 2015.
    [8]
    刘毅, 江国锋, 许昆, 等. 中间层金属对Al2O3/1Cr18Ni9Ti钎焊接头组织及剪切强度的影响[J]. 金属学报, 2015, 51(2): 209-215.
    [9]
    王颖, 杨振文, 杨振文, 等. Invar合金与Si3N4陶瓷钎焊接头界面组织和性能研究[J]. 稀有金属材料与工程, 2015, 44(2): 339-343.
    [10]
    周英豪, 刘多, 雷玉珍, 等. 复合活性钎料钎焊Cu与Al2O3的接头组织及性能[J]. 哈尔滨工业大学学报, 2016, 48(11): 69-74.
    [11]
    钱耀川, 丁华东, 傅苏黎. 陶瓷-金属焊接的方法与技术[J]. 材料导报, 2005, 19(11): 98-100.
    [12]
    李潇一. 氧化物陶瓷与金属的活性钎焊工艺及其机理研究[D]. 天津: 天津大学硕士学位论文, 2009.
    [13]
    任伟, 张丽霞, 郝通达, 等. Al2O3陶瓷与5005铝合金的高频感应钎焊[J]. 焊接学报, 2015, 36(6): 35-38.
    [14]
    邓腾辉, 陈和兴, 刘凤美, 等. Al2O3陶瓷与Cr12钢活性钎焊接头的组织和性能探讨[J]. 热加工工艺, 2015(9): 56-58.
    [15]
    Do Nascimento R M, Martinelli A E, Buschinelli A J A. Recent advances in metal-ceramic brazing[J]. Cermica, 2003, 49(312): 178-198.
    [16]
    付伟, 宋晓国, 赵一璇, 等. Al2O3陶瓷与紫铜的间接钎焊[J]. 焊接学报, 2015, 36(6): 27-30.
    [17]
    佘继红, 江东亮. 碳化硅陶瓷的发展与应用[J]. 陶瓷工程, 1998(3): 3-11.
    [18]
    郭泽亮. 陶瓷与金属接合技术[J]. 材料开发与应用, 1994(6): 41-44.
    [19]
    任欢. SiC陶瓷与不锈钢层状材料的连接技术[D]. 天津: 河北工业大学硕士学位论文, 2014.
    [20]
    刘会杰, 冯吉才, 钱乙余, 等. SiC陶瓷与TC4钛合金反应钎焊的研究[J]. 焊接, 1998(11): 22-25.
    [21]
    吕宏, 康志君, 楚建新, 等. 铜基钎料钎焊SiC/Nb的接头组织及强度[J]. 焊接学报, 2005, 26(1): 29-31.
    [22]
    张丽霞, 冯吉才, 李卓然, 等. TiC陶瓷/NiCrSiB/铸铁钎焊连接的界面组织和强度分析[J]. 材料科学与工艺, 2005, 13(2): 116-118.
    [23]
    张丽霞, 冯吉才, 李卓然, 等. 连接温度对TiC陶瓷/铸铁钎缝处剪应力的影响[J]. 焊接学报, 2002, 23(4): 6-8.
    [24]
    冯吉才, 靖向萌, 张丽霞, 等. TiC金属陶瓷/钢钎焊接头的界面结构和连接强度[J]. 焊接学报, 2006, 27(1): 5-8.
    [25]
    翟华嶂, 李建保, 吴疆, 等. 发动机高温部件的陶瓷材料应用及性能测试[J]. 材料工程, 2010(6): 78-83.
    [26]
    郭景坤. 关于先进结构陶瓷的研究[J]. 无机材料学报, 1999, 14(2): 193-202.
    [27]
    Elsawy A H, Fahmy M F. Brazing of Si3N4 ceramic to copper[J]. Journal of Materials Processing Technology, 1998, 77(1-3): 266-272.
    [28]
    张杰, 朱玲斌, 杨世伟. 钎料中Pd含量对钎焊Si3N4/40CrMo接头组织和性能的影响[J]. 煤矿机械, 2006, 27(12): 72-74.
    [29]
    高硕遥. Ag-Cu-Ti+WCp复合钎料连接Si3N4陶瓷/42CrMo钢的接头组织和性能研究[D]. 哈尔滨: 哈尔滨工业大学硕士学位论文, 2010.
    [30]
    Asthana R, Singh M. Evaluation of Pd-based brazes to join silicon nitride to copper-clad-moldenum [J].Ceramics International, 2009, 35: 3511-3515.
    [31]
    Kang S, Kim H J. Design of high-temperature brazing alloys for ceramic-metal joints[J]. Welding Journal, 1995, 74(9): 289s-295s.
    [32]
    Seo D W, Lim J K. Effects of strain rate and temperature on fracture strength of ceramic/metal joint brazed with Ti-Ag-Cu alloy[J]. KSME International Journal, 2002, 16(9): 1078-1083.
    [33]
    Hadian A M, Drew R A L. Distribution and chemistry of phases developed in the brazing of silicon nitride to molybdenum[J]. Journal of the European Ceramic Society, 1999, 19(8): 1623-1629.
    [34]
    向军辉, 肖汉宁. TiB2材料的研究现状及其应用[J]. 陶瓷工程, 1996(4): 40-44.
    [35]
    何代华. TiB2陶瓷与金属的SHS反应焊接[D]. 武汉: 武汉理工大学硕士学位论文, 2002.
    [36]
    Miyamoto Y, Nakamoto T, Koizumi M, et al. Ceramic-to-metal welding by a pressurized combustion reaction[J]. Journal of Materials Research, 1986, 1(1): 7-9.
    [37]
    刘建平. (TiB+Fe)/Fe叠层梯度材料的SHS/QP制备[D]. 武汉: 武汉理工大学硕士学位论文, 2001.
    [38]
    杨卫岐. ZrB2-SiC陶瓷连接接头中原位TiB晶须生长机制及增强机理研究[D]. 哈尔滨: 哈尔滨工业大学硕士学位论文, 2014.
    [39]
    宋昌宝. ZrC-SiC陶瓷与Nb瞬时液相扩散连接工艺及界面反应机理[D]. 哈尔滨: 哈尔滨工业大学博士学位论文, 2014.
  • Related Articles

    [1]XIE Shiyan, YAN Jiayi. Analysis of microstructure and properties of high silver brazing filler metal used for induction brazing of motor rotor[J]. WELDING & JOINING, 2025, (6): 23-29, 37. DOI: 10.12073/j.hj.20240830002
    [2]Jiang Yan, He Yunlong, Li Nan, Luo Tingbi, Yang Dong. Effect of Pr on microstructure and properties of Sn58Bi solder[J]. WELDING & JOINING, 2022, (2). DOI: 10.12073/j.hj.20211007001
    [3]MA Yiming, CHU Jijun, Lü Xiaochun, SUN Fenglian. Effect of Ag and Zn on wettability of Sn58Bi solder and microstructure of soldered joint[J]. WELDING & JOINING, 2020, (12): 11-15. DOI: 10.12073/j.hj.20201010001
    [4]YANG Fang, LI Tianli, HE Xin, HAN Jichao, HE Jinchuan. Low temperature lead-free soldering of 6063 aluminum alloy[J]. WELDING & JOINING, 2020, (11): 28-31. DOI: 10.12073/j.hj.20200917003
    [5]DUAN Xuanzheng, ZHAO Fei, WANG Shudan, ZHAO Guanghui, WU Zhisheng. Current situation and development of 3D printing materials for metal at home and abroad[J]. WELDING & JOINING, 2020, (2): 49-55. DOI: 10.12073/j.hj.20190922001
    [6]HUANG Xiaomeng, QI Yuefeng, ZHANG Guoqing, CHEN Xiaoyu, GUO Feifei. Properties of AgCuInTi alloy brazing filler metal for active joining of Al2O3 ceramic[J]. WELDING & JOINING, 2019, (12): 46-49. DOI: 10.12073/j.hj.20190720003
    [7]LI Jiping, WEI Guoqiang, KANG Yunqing. Effects of Ag and Cu on soldering properties and microstructure of Sn-40Bi solder alloy[J]. WELDING & JOINING, 2019, (8): 13-16. DOI: 10.12073/j.hj.20181221002
    [8]WANG Zuojin, WEN Baofeng, CAO Rui, CHEN Jianhong. Analysis of weldability of Mg-Al dissimilar metal cold metal transfer welding[J]. WELDING & JOINING, 2019, (2): 17-20. DOI: 10.12073/j.hj.20181023001
    [9]Zhang Guoqing, Wang Wei, Zhang Xi, Tang Chao, Wang Feng, Qi Yuefeng. Active brazing of 95Al2O3 ceramic parts[J]. WELDING & JOINING, 2017, (4): 50-52.
    [10]Zhang Dongdong, Liu Shuying, Chen Ze, Zhang Yiwen. Effect of element Sn and Cu on microstructure and mechanical properties of Zn-10Al solder[J]. WELDING & JOINING, 2017, (4): 21-24.
  • Cited by

    Periodical cited type(5)

    1. 马志鹏,张玉亭,李岩,周利锋,朱永坤. 石墨烯增强SiC/Al界面结合的第一性原理研究. 中国有色金属学报. 2025(02): 573-585 .
    2. 赵清清,孙文韬. Ceramic-copper substrate technology introduction. China Welding. 2022(02): 56-64 .
    3. 杨保琳,张强,任啟森,刘彤,廖业宏,陈国清. 钎焊工艺对SiC/Kovar真空钎焊接头组织与性能的影响. 真空科学与技术学报. 2021(10): 952-958 .
    4. 王微,胥凯,张帅谋,柳砚. 陶瓷/金属钎焊连接材料与工艺研究进展. 黄河科技学院学报. 2019(05): 30-34 .
    5. 李淳,郑祖金,亓钧雷,冯吉才,曹健. AgCu+SiC复合钎料中SiC含量对Al_2O_3/TC4接头组织和性能的影响. 焊接学报. 2019(12): 11-16+161 .

    Other cited types(14)

Catalog

    Article views (258) PDF downloads (14) Cited by(19)

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return