Correction of structural stress method for fatigue test of T-joint
-
摘要: 为了更为精确地预测焊接结构的疲劳寿命,基于承载T形焊接接头的疲劳试验,建立有限元分析模型,50%存活率下,分别采用Verity法的位移控制模型、载荷控制模型、VOLVO法等结构应力法对T形焊接接头疲劳寿命进行寿命预测,结果表明,Verity法的载荷控制模型计算结果偏安全,VOLVO法计算结果偏危险,Verity法的位移控制模型计算结果与实际最为接近。而后,基于试验数据,修正了VOLVO法的柔性S-N曲线,采用该修正模型的计算结果可以较为精确地反映工程实际。Abstract: In order to predict the fatigue life of the welded structure more accurately,a finite element analysis model was established based on the fatigue test of T-joint. At the 50% survival rate,the displacement control model of verity method,the load control model of verity method,and the VOLVO method were adopted respectively to predict the fatigue life of the T-joint. It is shown that the calculate results of the load control model of verity method are more safe and the results of VOLVO method are more dangerous. The results of the displacement control model of verity method are the closest to the actual ones. Then,based on the test data,the flexible S-N curve of the VOLVO method was revised,and the results of the modified model can reflect the actual project accurately.
-
-
[1] British Standard Institute. Fatigue design and assessment of steel structures:BS7608-1993 [S]. British: BSI, 1993.
[2] AAR Manual of Standards. Fabrication and construct ion of freight cars section c part II: AAR-M1001-2007 design[S]. America: AAR, 2007.
[3] IIW Joint Working Group. IIW document Recommendations for fatigue design of welded joints and components:IIW XIII1965-2003/XV1127-2003[S]. England: IIW/IIS, 2003.
[4] Fermér M, Andréasson M, Frodin B. Fatigue life prediction of MAG-welded thin sheet structures-theory and experiments.MSc Thesis[J]. Journal of Materials & Manaufacturing 1997, 107(5):331-340.
[5] Dong P. A structural stress definition and numerical implementation for fatigue analysis of welded joints[J]. International Journal of Fatigue, 2006, 23: 865-876.
[6] 李向伟,兆文忠. 基于Verity方法的焊缝疲劳评估原理及验证[J]. 焊接学报,2010,31(7): 9-12. [7] 杨鑫华,孙屹博,邹丽. 网格不敏感结构应力的焊接疲劳数据分布[J].焊接学报,2015,36(2): 11-14. [8] 董亚飞,魏国前,漆金贤等. 纵向受载T 形焊接接头结构应力构造方法分析[J]. 焊接学报,2017,38(5): 31-34. [9] 陈江义, 吕海勇, 罗琳丽. 基于Verity方法的起重机箱型主梁疲劳寿命分析[J]. 制造业自动化, 2014(2):6-9. [10] 李志强, 文豪, 盖蕾, 等. 基于Verity方法的桥式起重机主梁疲劳寿命研究[J]. 太原科技大学学报, 2017, 38(4):292-295. [11] 李志强. 基于Verity与子模型的桥式起重机焊缝疲劳研究[D]. 太原:太原科技大学硕士学位论文, 2016. [12] 李向伟, 王剑, 黄永生, 等. 货车焊接结构疲劳寿命预测系统开发与关键技术[J]. 中国机械工程, 2010, 21(9):1061-1065. -
期刊类型引用(2)
1. 谢纳冰,杨娜,瞿喜强,张春燕,王永兴. 黄化机搅拌轴断裂成因及疲劳寿命. 东华大学学报(自然科学版). 2021(06): 44-50+65 . 百度学术
2. 钟懿,胡伟成,孙泽海,王经纬. 基于等效结构应力法的叉臂疲劳寿命研究. 建设机械技术与管理. 2021(06): 88-90 . 百度学术
其他类型引用(0)
计量
- 文章访问数: 20
- HTML全文浏览量: 9
- PDF下载量: 17
- 被引次数: 2