圆柱电池集流片电阻焊接系统设计

详细信息

Design of resistance welding system for collector of cylindrical battery

Department of Electrical Engineering, Henan Polytechnic, Zhengzhou 450046, China

摘要: 圆柱电池集流片电阻焊接系统设计
- 集流片 /
- 电阻焊 /
- 6工位 /
- 自动化
Abstract: For cylindrical battery and collector resistance spot welding, six-station welding system was designed, which consists the feeding Station, collecting material, welding station, pre-bending station，bending station and blanking station, and each station runs at the same time, so the production efficiency is improve. The entire system realizes the automatic feeding and unloading parts, automatic welding, and automatic bending processing after welding, which improves the degree of automation, the human cost is saved.
- collector /
- resistance welding /
- six stations /
- automation

[1]	徐蒙,张足茜,贾力气,等.圆柱型锂离子动力电池放电过程电化学与传热特性研究[J].中国电机工程学报,2013,33(32):54-61.
[2]	李林贺,邓适.锂电池极耳电阻焊焊接质量改善[J].焊接技术,2013,42(6):63-65.
[3]	王玉涛,庞松,樊彦良,等.超声波焊接技术在锂离子电池行业中的应用[J].电池,2012,42(6):350-351.
[4]	朱政强,吴宗辉,范静辉,等.超声波金属焊接的研究现状与展望[J].焊接技术,2010,39(12):1-6.
[5]	刘红伟,李京龙,马冰.7A05铝合金激光-MIG复合焊接头组织分析[J].焊接,2013(2):46-49.
[6]	周向阳,刘瑛,张旗.叉车滑架模块式快速焊接夹具设计[J].电焊机,2014,44(4):112-115.
[7]	李绍炎.超薄不锈钢膜盒式传感器环缝的精密凸焊[J].焊接技术,2009,38(2):23-26.
[8]	衣思平,许宝忠,李梅,等.锂离子蓄电池极耳的激光自动焊接[J].电源技术,2005,29(2):80-81.