• 中国科技核心期刊(中国科技论文统计源期刊)

铅合金熔滴冲击45钢冷基板与45钢表面熔池的对比试验

张永恒, 杜军, 王勇超, 魏正英

张永恒, 杜军, 王勇超, 魏正英. 铅合金熔滴冲击45钢冷基板与45钢表面熔池的对比试验[J]. 焊接, 2022, (6). DOI: 10.12073/j.hj.20220221001
引用本文: 张永恒, 杜军, 王勇超, 魏正英. 铅合金熔滴冲击45钢冷基板与45钢表面熔池的对比试验[J]. 焊接, 2022, (6). DOI: 10.12073/j.hj.20220221001
Zhang Yongheng, Du Jun, Wang Yongchao, Wei Zhengying. Comparative experiment between 45 steel cold substrate and molten pool on surface of 45 steel impacted by lead alloy droplet[J]. WELDING & JOINING, 2022, (6). DOI: 10.12073/j.hj.20220221001
Citation: Zhang Yongheng, Du Jun, Wang Yongchao, Wei Zhengying. Comparative experiment between 45 steel cold substrate and molten pool on surface of 45 steel impacted by lead alloy droplet[J]. WELDING & JOINING, 2022, (6). DOI: 10.12073/j.hj.20220221001

铅合金熔滴冲击45钢冷基板与45钢表面熔池的对比试验

Comparative experiment between 45 steel cold substrate and molten pool on surface of 45 steel impacted by lead alloy droplet

  • 摘要: 针对特殊装备领域传统钢/铅粘接结构中存在的粘接层易老化脱落、长期稳定性差的问题,提出一种熔滴沉积复合TIG焊(gas tungsten arc welding)电弧增材制造新工艺,用于制造钢/铅双金属结构。文中比较性地研究了铅合金熔滴冲击铺展45钢冷基板与45钢表面熔池后的凝固形貌,通过引入无量纲数研究了熔滴冲击速度、温度对熔滴铺展凝固形貌的影响规律,利用OM,LSCM,SEM,EDS,XRD以及显微硬度测试等方法与手段,分析了熔滴沉积复合TIG电弧增材制造钢/铅双金属试样的界面微观组织结构与显微硬度。结果表明,铅合金堆积层铺展因子随熔滴冲击速度的增加呈明显非线性增加;界面层金属间化合物主要为FeSb2和FeSn2,其厚度随电弧热输入的增加而增加;钢/铅界面处的显微硬度明显高于铅合金堆积层和45钢母材;界面层中心左侧的硬度值达到最大值,为785.3 HV,45钢一侧平均硬度为343.7 HV,铅合金一侧平均硬度为24.3 HV。
    Abstract: Aiming at the problems that the bonding layer was easily aging and peeling, poor long-term stability, and weak environmental adaptability in traditional steel/lead bonding structures in the field of nuclear weapons equipment, a new arc additive manufacturing process of droplet deposition composite TIG was proposed to manufacture steel/lead bimetallic structures.Solidification morphology of lead alloy droplets after impacting and spreading on 45 steel cold substrate and molten pool on surface of 45 steel was comparatively studied in this paper.Effects of impact velocity and initial temperature of droplets on solidification morphology of the impacted droplets were investigated by adopting dimensionless numbers.Interfacial microstructure and Vickers microhardness of steel/lead bimetallic specimens were analyzed by methods of OM, LSCM, SEM, EDS, XRD and hardness experiments.The results showed that spreading factor of lead alloy accumulation layer increased nonlinearly with the increase of impact velocity of droplets.Intermetallic compounds of interface layer were mainly FeSb2 and FeSn2, whose thickness increased with the increase of arc heat input.Vickers microhardness at the interface of steel/lead was significantly greater than that of lead alloy accumulation layer and 45 steel base metal.Hardness on the left side of interface layer center reaches the maximum value 785.3 HV, average hardness of 45 steel was 343.7 HV, and average hardness of lead alloy was 24.3 HV.
  • [1] 杨强, 袁明康, 李明珍, 等.γ辐照对环氧树脂钢铅钢粘接件力学性能的影响[J].辐射研究与辐射工艺学报, 2005(6):371-372.
    [2] 杨强, 袁明康, 李明珍,等.环氧树脂钢铅钢粘接工艺优化程度评价方法[J].材料科学与工艺, 2007, 15(6):839-843.
    [3] 李建文, 王增勇, 汤光平.金属壳体粘接结构件的超声检测[J].无损检测,2010,32(4):283-285.
    [4] 李建文.粘接质量成像检测研究[J].中国胶粘剂, 2019(6):1-3.
    [5] 李建文, 汤光平, 霍合勇,等.“钢-铅”粘接结构非接触无损检测技术的研究[J].中国胶粘剂, 2013, 22(7):21-24.
    [6] 孙朝明, 汤光平, 李建文.脉冲反射法检测粘接缺陷的有限元模拟[J].无损检测, 2014, 36(7):6-10.
    [7] 李建文, 汤光平, 孙朝明,等.铅钢铅复合结构板材超声检测技术研究[J].兵器材料科学与工程, 2015, 38(1):89-92.
    [8] 江晖, 徐东鸣, 宋志坤.一种钢-铅-环氧树脂粘接结构的优化研究[J].制造业自动化, 2015, 37(24):85-87.
    [9] 夏嘉斌, 孙广开, 宋潮,等.“钢-铅”粘接结构非接触激光超声检测方法[J].红外与激光工程, 2018,47(1):238-244.
    [10] 孙凯华, 李建文, 孙朝明,等.钢-铅粘接结构的粘接强度对超声体波反射与透射特性的影响[J].应用声学, 2019, 38(1):93-104.
    [11] 邢中枢.关于Fe-Pb相图的几个问题[J].金属学报, 1987(1):121-125.
    [12] Naiqiang X, Junqi S, Shengsun H, et al.Bimetallic structure of Ti6Al4V and Al6.21Cu fabricated by cold metal transfer additive manufacturing via Nb interlayer added by TIG[J].Materials Letters, 2021, 302: 130397.
    [13] Shalini S, Jinoop A N, Palani I A, et al.Microstructure and mechanical properties of NiTi-SS bimetallic structures built using Wire Arc Additive Manufacturing[J].Materials Letters, 2021, 303: 130499.
    [14] Kseniya O, Andrey V, Andrey C, et al.Characterization of abimetallic multilayered composite “stainless steel/copper” fabricated with wire-Feed electron beam additive manufacturing[J].Metals, 2021, 8: 1151.
    [15] Kellen D T, Bandyopadhyay A.Modeling and experimental validation of additively manufactured tantalum-titanium bimetallic interfaces[J].Materials & Design, 2021, 207: 109793.
    [16] Zhang W Q, Liao H L, Hu Z H, et al.Interfacial characteristics and mechanical properties of additive manufacturing martensite stainless steel on the Cu-Cr alloy substrate by directed energy deposition[J].Journal of Materials Science & Technology, 2021, 90: 121-132.
    [17] 徐思远, 杜军, 赵光喜,等.45钢/锡铅合金复合结构熔融沉积中熔滴过渡行为[J].浙江大学学报(工学版), 2020, 367(11):163-171.
    [18] Gielen M V, Riёlle R, Robin B J K, et al.Solidification of liquid metal drops during impact[J].Journal of Fluid Mechanics, 2020, 883:1-20.
    [19] Ramanuj V, Albert Y T.A numerical model for a hypoeutectic alloy droplet deposition with non-equilibrium solidification[J].Journal of Materials Science, 2017, 10: 6034-6049.
    [20] Pinto L M.Spreading, solidification and remelting behavior of liquid metal droplets sequentially impinging onto a metal substrate[D].Arlington: The University of Texas at Arlington, 2005.
    [21] Ramanuj V.Numericalmodeling of an alloy droplet deposition with non-equilibrium solidification[D].Arlington: The University of Texas at Arlington, 2016.
    [22] Shetabivash H, Ommi F, Heidarinejad G.Numerical analysis of droplet impact onto liquid film[J].Physics of Fluids, 2014, 1: 012102.
    [23] 朱志良.正确理解活化能和温度的关系[J].化学教育, 1993, 5:48-50.
    [24] 程志.钛-钢异种金属MIG/TIG双面双弧焊接受焊行为及机制研究[D].北京:北京科技大学博士学位论文,2021.
    [25] 万龙.铝/钢搅拌摩擦强形变诱导扩散行为及接头性能研究[D].哈尔滨:哈尔滨工业大学博士学位论文,2019.
计量
  • 文章访问数:  14
  • HTML全文浏览量:  1
  • PDF下载量:  19
  • 被引次数: 0
出版历程
  • 收稿日期:  2022-02-20
  • 发布日期:  2022-06-24

目录

    /

    返回文章
    返回