Influence of section size of explosive on effect of welding residual stress relieved by explosive and its numerical simulation

JIN Yuhua; DUAN Weidong; CHEN Ning; CHEN Pei

doi:10.12073/j.hj.20181120002

WELDING & JOINING > 2019 > (6): 22-26. > DOI: 10.12073/j.hj.20181120002

JIN Yuhua, DUAN Weidong, CHEN Ning, CHEN Pei. Influence of section size of explosive on effect of welding residual stress relieved by explosive and its numerical simulation[J]. WELDING & JOINING, 2019, (6): 22-26. DOI: 10.12073/j.hj.20181120002

Citation:

PDF (1026 KB)

Influence of section size of explosive on effect of welding residual stress relieved by explosive and its numerical simulation

1. Wuhan University of Science and Technology, Wuhan 430081, China;
2. CRPCE-WUST Blasting Technology Research Center, Wuhan 430081, China

More Information

Received Date: November 19, 2018

Graphical Abstract

Abstract

Abstract

Through the theoretical analysis of the impulse generated during the relieving process of the residual stress by the explosion,it is explained that at the same explosive parameters and the mode of distribution,the effect of the width of the strip on the residual stress relieving is larger than that of the thickness of the strip. At the same time,the relationship between the width of the strip and the thickness of the strip was determined,and the calculation formula of the width of the strip was given. Based on the indirect coupling of welding temperature field and stress field to solve the welding residual stress,the ANSYS/LS-DYNA nonlinear finite element analysis software was used to simulate the process of relieving residual stress at different explosives of different cross-section explosives. The results show that when the width of the strips is the same and more than twice the thickness of the explosive,as the thickness of the explosive increases,the impulse generated by the explosion does not change,and the level of welding residual stress is basically the same. When the thickness is the same,as the width of the explosive increases,the impulse generated by the explosion increases,and the level of welding residual stress is increased.
- explosion treatment,
- welding residual stress,
- impulse,
- strip section,
- numerical simulation

FullText(HTML)

References (18)

References

[1]	曾巍. 爆炸消除焊接残余应力的数值模拟[D]. 武汉:华中科技大学硕士学位论文, 2011.
[2]	Hou H L, Zhu X, Liu R Q. Welding residual stress relieving of steel 921A of using explosive method [J]. Transactions of the China Welding Institution, 2004, 25(1):119-123.
[3]	Denisov I V, Saykov I V, Kapustin R D . Explosion welding of Al + Cu bimetallic joints for electrical contacts[J]. Welding International.2017,31(10):773-776.
[4]	Grinberg B A, Pushkin M S, Patselov A M, et al. The structure of molten zones in explosion welding (aluminium-tantalum, copper-titanium)[J].Welding International.2017,31(5):384-393.
[5]	Denisov I V.Structure and properties of ‘Steel 08kp+ChNMSh Iron’ bimetal obtained by explosion welding[J].Metal Science and Heat Treatment, 2017, 59(1-2): 102-105.
[6]	Zlobin B S, Kiselev V V, Shterzer A A, et al. Use of emulsion explosives in experimental studies of flows in the bonding zone in explosive welding[J].Combustion, Explosion, and Shock Waves, 2018, 54(2):231-237.
[7]	Lazurenko D V,Bataev I A, Mali V I, et al. Structural transformations occurring upon explosive welding of alloy steel and high-strength titanium[J].Physics of Metals and Metallography, 2018, 119(5): 469-476.
[8]	Kolpakov A G,Rakin S I.Estimation of stress concentration in a welded joint formed by explosive welding[J]. Journal of Applied Mechanics and Technical Physics, 2018, 59(3): 569-575.
[9]	Zhang Min, Zhang Tao, Cai Junqing,et al. Effect of heat treatment on microstucture and properties of explosive welding clad plate of TA1/Q345[J].China Welding, 2018, 27(1):26-31.
[10]	Malakhov A Yu, Saikov I V, Nikolaenko P A,et al. Reverse schemes of explosive cladding of long-length pipe billets[J].Inorganic Materials: Applied Research, 2018, 9(2):347-350.
[11]	Liu Kaixin. Mechanism of explosive technique on relieving welding residual stresses [J]. Chinese Physics Bulletin: English Version, 2005, 22(3):744-746.
[12]	解德, 李荣锋. 爆炸处理消除16MnJ超厚钢板焊接残余应力[J]. 爆炸与冲击, 1995, 15(1):76-81.
[13]	李荣锋. GB/T 26078—2010《金属材料焊接残余应力爆炸处理法》国家标准简介[C].长沙:中南地区mts材料试验学术会议, 2014.
[14]	李照广, 张全贞, 吕建. 钢结构焊接的Ansys数值模拟[J]. 四川理工学院学报(自科版), 2016, 29(5):38-42.
[15]	刘凯欣, 张晋香, 刘颖, 等.爆炸法消除焊接接头残余应力的数值模拟[J]. 应用力学学报, 2004, 21(2):10-15.
[16]	李美堂.爆炸法消除焊接残余应力专用炸药的研究[J]. 中国矿业, 2000(S2):55-58.
[17]	Robertson N J, Hayhurst C J, Fairlie G E. Numerical simulation of explosion phenomena[J]. Journal of Applied Behavioral Science, 2014, 30(2):247-270.
[18]	管建军, 陈怀宁.爆炸消除中厚板焊接残余应力工艺数值模拟[J]. 焊接学报, 2011, 32(9):105-108.

Cited By

Cited by

Periodical cited type(1)

张量. 爆炸法消除焊接残余应力对金属材料常规力学性能的影响. 世界有色金属. 2019(24): 282-283 .

Other cited types(0)

Get Citation

PDF

XML

Article views (21) PDF downloads (21) Cited by(1)

Turn off MathJax

Article Contents

Abstract

References

Influence of section size of explosive on effect of welding residual stress relieved by explosive and its numerical simulation

Abstract

References

Cited by

Periodical cited type(1)

Other cited types(0)

Catalog

Export File

Citation

Format

Content