Application and research of computer simulation and emulation technology in underwater welding
-
Abstract: With the rapid development of computer technology, computer simulation and emulation technology have been widely used as one of important means to study the welding process. In this paper, the application and research status of computer simulation and emulation technology in underwater welding were described. It focuses on the application of finite difference method, finite element method and finite volume method in the underwater welding. Furthermore, the simulation methods, principles, modeling and analytical methods in research were introduced. The current problems and future directions of research were also proposed.
-
Keywords:
- computer simulation /
- emulation /
- underwater welding
-
-
[1] 张洪涛,钟诗胜,冯吉才.水下焊接技术现状及发展[J].焊接,2011(10):18-22. [2] 王中辉,李冬雪.焊接数值模拟技术的发展现状[J].焊管,2010,33(6):28-31. [3] 杜乃在.计算机仿真在焊接学科中的应用[J].焊接技术,1999(1):42-44. [4] 刘多,刘一搏,周利,等.水下湿法焊接材料的研究进展[J].焊接,2012(12):18-22. [5] Ghadimi P, Ghassemi H, Ghassabzadeh M, et al. Three-dimensional simulation of underwater welding and investigation of effective parameters [J]. Welding Journal, 2013, 92: 239-249.
[6] Fukuoka T, Fukui S. Analysis for cooling process of under-water welding-comparison with welding in air [J]. Journal of the Marine Engineering Society in Japan, 1993, 22(12): 767-774.
[7] Dill J F. Model for estimation of thermal history produced by a single pass underwater wet weld [D]. Naval Postgraduate School, Monterey, America, 1997.
[8] 李传曦.水下焊接温度场的有限元法[J].海洋工程,1986,4(2):64-72. [9] 陈楚,汪建华,杨洪庆.水下焊接冷却特性的有限元分析[J].海洋工程,1983,1(4):34-38. [10] Hamann R, Mahrenholtz O. On the influence of the surface heat transfer coefficient on wet underwater welds [C]. Fourth International Offshore and Polar Engineering Conference, International Society of Offshore and Polar Engineers, Osaka, Japan, 1994: 112-119.
[11] Liu X W, Wang G R, ShiY H, et al. Finite element simulation of three-dimensional temperature field in underwater welding [J]. China Welding, 2007, 16(2): 59-65.
[12] 贾剑平,陈建平,刘云龙,等.基于ANSYS的水下局部干法焊接过程温度场分析[J].电焊机,2012,42(11):1-5. [13] Zhang H J, Liu H J, Yu L. Thermal modeling of underwater friction stir welding of high strength aluminum alloy [J]. Transactions of Nonferrous Metals Society of China, 2013, 23: 1114-1122.
[14] Ronda J, Mahrenholtz O, Hamann O. Thermomechanical simulation of underwater welding processes [J]. Archive of Applied Mechanics, 1992, 62: 15-27.
[15] Lindhorst L, Mahrenholtz O. On the influence of wet underwater welding on CTOD-δ5 [J].International Journal of Fracture, 1999, 97: 263-277.
[16] 赵博.水下湿法焊接温度场和应力变形的有限元分析[D].济南:山东大学硕士学位论文,2012. [17] Sun W, LiX J, Kazuyuki H. Numerical simulation of underwater explosive welding process [J]. Materials Science Forum, 2014, 767: 120-125.
[18] 李连波,王环环,马洪伟,等.水下焊接焊丝矫直机构设计的有限元分析[J].焊接设备与材料,2015,44(2):43-45. [19] Isiklar Y V, Giegin I. Numerical modeling of underwater welding [J]. Journal of Naval Science and Engineering, 2011, 7(2): 11-29.
[20] Schmidt H P, Specthofer G. Experimental and theoretical investigation of high-pressure arcs. I. The cylindrical arc column (two-dimensional modeling) [J]. IEEE Transactions on Plasma Science, 1996, 24(4): 1229-1238.
[21] 李志刚,张华,贾剑平.基于旋转电弧传感器的水下焊接高压电弧仿真计算[J].焊接学报,2010,31(7):17-21. [22] 陈海军,张华,毛志伟,等.局部干法焊旋转电弧传感设计及数值模拟[J].热加工工艺,2011,40(11):129-135. [23] 贾文卓,朱加雷,高辉,等.水下局部干式焊接排水气罩研究[J].北京石油化工学院学报,2010,18(4):47-50. [24] 李兰,薛龙,黄军芬,等.水下局部干法焊接圆形排水罩的流体仿真分析[J].焊接学报,2016,37(2):43-46. [25] Dag E. Virtual deep-sea unmanned welding [D]. Norway Narvik University College, Norway, 2001.
[26] 何银水.水下焊接焊缝的识别与跟踪[D].南昌:南昌大学硕士学位论文,2006. [27] 舒新字,王国荣,李国进.水下机器人技术在焊接中的应用现状与前景[J].电焊机,2005,35(6):24-28. [28] 高辉,焦向东,周灿丰,等.基于Abaqus的水下摩擦螺柱焊焊接过程仿真[J].焊接学报,2014,35(12):50-54. [29] 王健.基于粒子物理学的水下湿法旋转电弧模拟仿真[D].南昌:华东交通大学硕士学位论文,2015.
计量
- 文章访问数: 17
- HTML全文浏览量: 9
- PDF下载量: 36
下载:
