加氢装置高压空冷器中低合金钢管板镍基合金带极堆焊

详细信息

Strip cladding process of nickel base alloy on low alloy steel tube plate in high pressure air coolers of hydrogenation plant

摘要: 管子与管板接头对空冷器的耐腐蚀性能具有决定性影响。本项目在低合金钢管板表面堆焊镍基合金，管子使用镍基合金。在保证空冷器具有优良抗腐蚀性能的前提下，很大程度上降低了设备投资成本。为了满足加氢装置高压空冷器抗腐蚀要求，采用镍基合金带极堆焊工艺对Q345R（HIC）低合金钢管板进行焊接，以提高其耐腐蚀性能，并进行焊接工艺评定，得到了最佳堆焊工艺参数，完成了产品制造。
- 加氢装置高压空冷器 /
- 镍基合金带极堆焊 /
- 低合金钢管板
Abstract: Tube and tube sheet joints have a decisive influence on the corrosion resistance of air coolers.The nickel base alloy was deposited on the surface of low alloy steel tube plate,and the tube is made of nickel base alloy.The cost of equipment is greatly reduced under the premise that the air cooler has excellent corrosion resistance.In order to meet the requirement of corrosion resistance for high pressure air coolers in hydrogenation plant,strip cladding of nickel base alloy was carried out on the surface of Q345R（HIC）low alloy steel tube plate to improve the corrosion resistance.Meanwhile,welding procedure qualification was carried out to obtain the best strip cladding parameters,and the product was manufactured.
- high pressure air coolers in hydrogenation plant /
- strip cladding of nickel base alloy /
- low alloy steel tube plate

[1]	冯勇,罗纯东.Incoloy 825材料在加氢裂化装置高压空冷器上的应用[J].炼油技术与工程,2006,36(5):24-26.
[2]	柴祥东.加氢反应产物空冷系统的腐蚀及其复杂性[J].石油化工设备技术,2016,37(4):32-37.
[3]	尹继英.关于Incoloy 825加氢高压空冷器的加工技术分析[J].中国新技术新产品,2017(21):62-63.
[4]	黄健成,姚润钢,姚上卫.热处理对镍基625合金带极堆焊层组织及耐晶间腐蚀性能的影响[J].焊接技术,2016,45(7):29-32.
[5]	吕延茂,韩冰.大型管板带极堆焊平面度的控制[J].化工装备技术,2018,39(1):44-46.
[6]	杜金涛,潘秀娟,王子伟,等.大直径管板堆焊变形模拟及控制[J].石油化工设备,2016,45(6):61-64.
[7]	李双燕,张茂龙.三代核电带极电渣堆焊技术研究[J].现代焊接,2016(6):21-26.
[8]	袁园.煤气预热器埋弧带极堆焊工艺[J].化工管理,2016(14):208.
[9]	辛宇.反应堆压力容器三交区堆焊技术研究[J].机械工程师,2017(1):249-250.
[10]	王金光.大面积UNS N06625电渣带极堆焊技术研究[J].石油化工设备,2011,40(6):64-66.
[11]	熊建坤,张峻铭.某汽轮机大型管板带极堆焊数值模拟及工艺优化[J].东方汽轮机,2016(3):37-41.
[12]	黄健成,姚上卫.Nb含量对625合金带极堆焊层耐晶间腐蚀性能的影响[J].材料开发与应用,2016,31(5):36-39.
[13]	王雨,周大坤.加氢反应器内壁带极堆焊工艺探讨[J].中国石油和化工标准与质量,2014(10):84.

1.	张凯翔，张建晓，尤秀美，陶彦文，王丛元. 国产超级奥氏体不锈钢SB-690 N08367换热管与管板的焊接研究. 压力容器. 2021(07): 26-31+37 . 百度学术
2.	张天宇. 加氢高压空冷系统腐蚀原因分析与对策. 设备管理与维修. 2019(10): 66-68 . 百度学术